DuringKaohsiungFoodShow2021,TECOElectric&Machinerywilldisplayaseriesofsolutionshelpingfood-processingandaquacultureoperatorsinenergyconservationandcarbonabatement.Thesolu
2021/11/05 haoxiumin 334
TECOtoManufacturePrototypeGeneratorComponentsofanOffshoreWindTurbine
2021/05/20 haoxiumin 139
Since a reducer is a transmission device, many faults often occur during its operation due to external working conditions (e.g., bearing heavy loads) and internal factors.
2026/06/12 WUXI-TECO 1
It can be stated boldly – and accurately – that the overall volume of a motor is determined by the torque it must produce: the larger the volume, the greater the torque. Of course, there may be exceptions to this rule, but as a general guideline for motor selection, it is very useful.
2026/06/11 WUXI-TECO 1
Low-voltage motors are subject to mandatory BSMI inspection and control, while high-voltage motors are not subject to this restriction. Currently, high-voltage motors have no mandatory energy efficiency regulations and do not require registration in any official system; they only need to comply with relevant specifications for high-voltage electrical equipment.
2026/05/26 WUXI-TECO 9
KC Certification (Korea Certification) is a mandatory certification implemented by the Korean government to ensure the safety of electronic products and consumer goods. The Korean market has strict requirements for product safety and quality, and obtaining KC Certification is crucial for products to enter the Korean market.
2026/05/11 WUXI-TECO 4
ATEX certification and IECEx certification both describe the necessary requirements for equipment intended for use in potentially hazardous and dangerous areas, but they differ in certain aspects.
2026/04/29 WUXI-TECO 25
For Chinese companies planning to export products to Mexico, understanding the local compliance certification system is the first critical step to successfully entering the market. Among the various certifications in Mexico, NOM and FIDE are the two most relevant for electronic and electrical products. The former is a mandatory market access standard, while the latter is a voluntary energy efficiency label. This article provides a systematic overview of the key aspects of both certifications, offering practical compliance guidance for exporters.
2026/04/23 WUXI-TECO 26
The core difference between the routine test (factory test) and the type test for high-voltage three-phase asynchronous motors is:
The routine test is a "factory pass certificate" performed on every motor to verify the manufacturing quality of each unit. The type test is a "design validation report" performed on a sample from the same specification to verify the design and performance compliance of the entire series.
2026/04/16 WUXI-TECO 26
The insulation class of high-voltage three-phase asynchronous motors is a core technical indicator defined based on the maximum allowable operating temperature of the insulation materials.
2026/04/10 WUXI-TECO 67
There are many factors that affect the efficiency of high-voltage motors, including motor body losses, operating conditions, design and structural factors, as well as installation, maintenance, and environment. A detailed analysis is provided below.
2026/03/27 WUXI TECO 21
The five core performance parameters of a motor are key indicators for evaluating its performance, suitability for application scenarios, and selection criteria. They directly determine the operating state and effectiveness of the motor, including rated power, rated voltage, rated current, rated speed, and rated frequency.
2026/02/11 WUXI TECO 30
The current mandatory Energy Efficiency Label catalog in China covers 38 product categories. Key motor-related products included are:
• Permanent Magnet Synchronous Motors
• High-Voltage Three-Phase Squirrel-Cage Induction Motors
The implementation rules for these products are specified in the 2025 catalog. For Permanent Magnet Synchronous Motors, the new rules took effect on January 1, 2026. For High-Voltage Three-Phase Induction Motors, the rules will take effect on April 1, 2026.
2026/02/11 WUXI TECO 19
For enterprises engaged in the business of importing motors for re-export, the application of these exemption clauses is subject to strict limitations. The key lies in proving that the motors are not for sale or use within China but are intended for re-export.
2026/01/29 WUXI TECO 25
Driven by the persistent surge in raw material costs, TECO officially announced a price increase notice on January 5, 2026.
2026/01/08 WUXI TECO 61
The specific scope of CCC compulsory certification for low-voltage motors is as follows:It applies to low-power drive motors with a rated voltage above 36V (excluding 36V) and below DC 1500V or AC 1000V, including:
2025/10/29 WUXI TECO 77
Components imported for the exclusive purpose of manufacturing finished products that will be entirely exported may apply for an exemption from CCC certification. The applicant must be the factory/company that uses these components.
2025/10/29 WUXI TECO 50
NEMA standard enclosure types and their corresponding application environments, and convert NEMA enclosure type ratings to ANSI/IEC 60529 enclosure classification designations (IP).
2025/09/03 WUXI TECO 63
IEEE 841-2021: For ultra-high-efficiency, heavy-duty, fully enclosed, low-voltage squirrel-cage induction motors for the petrochemical industry, with a power range of 0.75 kW to 370 kW (1 hp to 500 hp).
2025/08/14 WUXI TECO 184
SPM, or surface permanent magnet synchronous motor, is characterized by its permanent magnets being directly attached to the rotor surface. In contrast, IPM, or internal permanent magnet synchronous motor, is designed and placed inside the rotor.
2025/07/16 WUXI TECO 75
The reasons for the reduction of motor insulation performance include environmental factors, material aging, mechanical damage, electrical problems, etc. The following methods can be used to deal with them.
2025/07/16 WUXI TECO 46
When a NEMA motor has special mounting dimensions, flanges, or special shaft features, this is indicated by adding a suffix letter to its frame number.
2025/07/16 WUXI TECO 65
The protection level is also called the IP level. The larger the number, the better the protection performance, and of course the higher the price. The IP (INGRESS PROTECTION) protection level system was drafted by IEC (INTERNATIONAL ELECTROTECHNICAL COMMISSION) to classify electrical appliances according to their dust and moisture resistance characteristics.
2025/07/11 WUXI TECO 41
When the motor is running, copper loss, iron loss and mechanical loss are all manifested in the form of heat. Part of this heat is absorbed by the motor and part is transmitted to the air. The heat ab
2025/07/11 WUXI TECO 36
CE certification, the abbreviation of "Conformité Européenne", is a certification mark issued by the European Union (EU) to indicate that the product complies with the relevant regulations and standards of the European internal market and has certain safety, quality and environmental protection performance. CE certification is an important proof for the sale and circulation of products in the European market.
2025/07/04 WUXI TECO 89
Before installing the encoder, you need to select the encoder based on the motor model, specifications, load, and usage scenarios. Select an encoder model that matches the motor. Explosion-proof motors require explosion-proof encoders, and the encoder needs to have a CCC explosion-proof certificate.
2025/07/04 WUXI TECO 63
Here is a list of TECO's historical models. You can contact us for repair, maintenance, and replacement services for these models.
2025/04/25 WUXI TECO 288
Motor Efficiency & How to improve it?Electric motor is a type of machine which converts electrical energy into mechanical energy using the interaction between magnetic field and current in its win
2023/07/26 WUXI TECO 310
Why use explosion proof motors?The use of explosion proof motors is essential for the safety of your personnel and equipment when operating in a hazardous location. Explosion proof motors are designed
2023/07/26 WUXI TECO 108
Non-Hazardous LocationsType 1 : General Purpose - IndoorEnclosures constructed for indoor use to provide a degree of protection to personnel against incidental contact with the enclosed equipment and
2023/07/26 Young 137
TECO Electric & Machinery Co., Ltd. signed a contract with Shine Energy Co., Ltd. today (Jan. 16), according to which the former's subsidiary Anneng Green Energy Co., Ltd. will make 100% acqui
2023/01/16 WUXI TECO 279
According to the 2022 Dow Jones Sustainability Index, TECO Electric & Machinery Co., Ltd. (1504-TW) has ranked first for three years in a row in the electrical machinery stocks in the global emerg
2022/12/10 WUXI TECO 144
TECO Electric & Machinery has once again staged a stellar performance in the annual Taiwan Excellence Awards organized by the Taiwan External Trade Development Council (TAITRA), with its smart mob
2022/11/23 WUXI TECO 90
TECO Electric & Machinery has been granted Taiwan Corporate Sustainability Awards (TCSA) 2022, the ninth year in a row for it to receive the honor, in acknowledgment of its strenuous effort and ac
2022/11/16 WUXI TECO 76
TECO Displays Shipping Motor at Kaohsiung Maritime and Defence Expo
2018/10/11 haoxiumin 99
DuringTaipeiInternationalIndustrialAutomationExhibition,TECOElectric&MachineryCo.,Ltd.willshowcaseaprototypeofautomatedguidedvehicle(AGV),manifestingthecompany'ss
2018/09/20 haoxiumin 136
Inresponsetothegovernment'sNewSouthboundPolicy,TECOElectric&MachinerybrokegroundonitsVietnamsmall-motorplantonJuly5,whichisscheduledtostartmassproductioninApril2
2018/09/20 haoxiumin 208
TECOwontheHANGZHOUXIZI-IUKParkingSystemCO.,ltd.awardforthebestsuppliersin2014.
2018/09/04 haoxiumin 101
OnMay23,2014,the11thChina(Wuxi)InternationalExpowasholdinWuxiInternationalExhibitionCenter,TecoasafamousmotormanufacturerwasinvitedtojoininthisExpo.ThegovernmentofficersinWu
2018/09/04 haoxiumin 172
This three and one half day seminar is for specialists and non-specialists who specify, contract, and accept motor or generator repairs and rewinds. Included in the program is material on increasing t
2018/09/04 haoxiumin 110
What is a Class 1 Division 2 Hazardous Area?You might have come across the term, Class I, Division 2 Hazardous Area. What does it mean?To understand this, we need to first understand two things- what
2023/07/28 WUXI TECO 142
Common causes of bearing abnormal noise:1. Impurities such as sand or carbon particles are mixed into the bearing to act as abrasives;2. Dirt such as water, acid or paint is mixed into the bearing to
2023/06/20 WUXI TECO 151
